We are the manufacturer of different kinds of spray booth for 20 years , according to customers requirements , we can design the best solution for you , and show you the 3D drawing , then you can know more claerly about the conbinetion spray booth /preparation bay you need .
For our filter cotton :
Same quality, our price is lower.
Same price, our quality is better.
All of our filter cotton is cost sales , so the min-order is USD 1000
Pre-filter (USD 0.8/M2 - USD 1.05/M2)
Speciality:
Consisted of special organic synthetic fiber, is a kind of high-density pocket filter.
It's designed for prefiltration or coarse filtration in the inlet of general ventilation and air conditioning system.
It's processed by high-performance synthetic fiber in gradual technology.
Large dust holding capacity and low initial resistance, economical and practical
Be workable many times after washing the dust collected
Temperature resistance: 110ºC
Be widely used in pleated and pocket filters
Specification:
Filtering Grade : G4/EU-4 DIN 24185
Note: Other specifications are available on request
Fiberglass filter/Paint stop filter /floor filter (USD 1.2/M2)
Speciality:
This product is composited of continuous monofilament glass fiberglass and it is progressively encrypted from the inlet side to the outlet side in fluffy state.
It is used in heat recovery systems and high-quality paint mist filtration of surface coating with the high rate of capturing particles and long life-cycle.
The inlet side is green, outlet side is white with good compressibility properties to ensure its stability and strong nature and to ensure that filter is not loose, scattered, and more conducive to store mist and dust.
Max Temperature resistance: 350 ºC
Medium Arrestance : 67.60 %
Specification:
Filtering Grade : G2/EU-2 DIN 24185
Ceiling filter
USD 2.2/M2--back is cloth
USD 2.5/M2--back is net
Speciality:
The series of ceiling filters are mainly used in surface spray-paint industry, especially for final filtration in spray booth, which is processed by high-powered nonwovens of antibreak synthetic fiber.
With gradual technology, the fiber density increases gradually toward pure air, high filter efficiency, extended working life.
Due to complete penetration of viscosity in media, dust particles can not pass. Fully filtered air evenly spreads to form a laminar flow state to achieve the best spray results.
Dense outlet side, low initial resistance, high dust holding capacity, good fire retardant and long working life, economical and reliable, the surface is reinforced by covered net scrim.
Moisture resistance, up to 100% relative humidity
Max Temperature resistance: 120 ºC
Medium Arrestance : 97.90 %
Specification:
Filtering Grade : F5/EU-5 DIN 24185
Note: Other specifications are available on request
Folded dry-type paper filter
Application:
filter the particulars of the solid and liquid in the air,adn reach the uniform flow effect
Filter material and features:
1.the design is good for the distribution of the speed
2.Low resistance and high efficiency
3.long-span than other paper filter,up to six times
4.can be used for 500-600 hours continuously,confirm to DIN54438 K1
5.It will be better if add fiberglass or synthetic cotton on inlet side.
6.can make filter with frame upon request
Specification :
For our filter cotton :
Same quality, our price is lower.
Same price, our quality is better.
All of our filter cotton is cost sales , so the min-order is USD 1000
Pre-filter (USD 0.8/M2 - USD 1.05/M2)
Speciality:
Consisted of special organic synthetic fiber, is a kind of high-density pocket filter.
It's designed for prefiltration or coarse filtration in the inlet of general ventilation and air conditioning system.
It's processed by high-performance synthetic fiber in gradual technology.
Large dust holding capacity and low initial resistance, economical and practical
Be workable many times after washing the dust collected
Temperature resistance: 110ºC
Be widely used in pleated and pocket filters
Specification:
Filtering Grade : G4/EU-4 DIN 24185
Weight (g/m2) | Air velocity (m/sec) | Air flow rate (m3/h) | Resistance (Pa) | Dust Holding Capacity (g/m2) | Flame resistance | Sizes |
300 | 0.45 | 1620 | 16-200 | 325 | F-1 DIN 53438 | 1M*20 M*15MM |
Note: Other specifications are available on request
Fiberglass filter/Paint stop filter /floor filter (USD 1.2/M2)
Speciality:
This product is composited of continuous monofilament glass fiberglass and it is progressively encrypted from the inlet side to the outlet side in fluffy state.
It is used in heat recovery systems and high-quality paint mist filtration of surface coating with the high rate of capturing particles and long life-cycle.
The inlet side is green, outlet side is white with good compressibility properties to ensure its stability and strong nature and to ensure that filter is not loose, scattered, and more conducive to store mist and dust.
Max Temperature resistance: 350 ºC
Medium Arrestance : 67.60 %
Specification:
Filtering Grade : G2/EU-2 DIN 24185
Weight (g/m2) | Air velocity (m/sec) | Air flow rate (m3/h) | Resistance (Pa) | Dust Holding Capacity (g/m2) | Flame resistance | Sizes |
250 | 1.20 | 4320 | 13-250 | 3540 | F-1 DIN 53438 | 0.75M*14 M*60MM 0.75M*20 M*60MM 0.80M*14M*60MM 0.80M*20M*60MM 1.00M*14M*60MM 1.00M*20M*60MM |
Ceiling filter
USD 2.2/M2--back is cloth
USD 2.5/M2--back is net
Speciality:
The series of ceiling filters are mainly used in surface spray-paint industry, especially for final filtration in spray booth, which is processed by high-powered nonwovens of antibreak synthetic fiber.
With gradual technology, the fiber density increases gradually toward pure air, high filter efficiency, extended working life.
Due to complete penetration of viscosity in media, dust particles can not pass. Fully filtered air evenly spreads to form a laminar flow state to achieve the best spray results.
Dense outlet side, low initial resistance, high dust holding capacity, good fire retardant and long working life, economical and reliable, the surface is reinforced by covered net scrim.
Moisture resistance, up to 100% relative humidity
Max Temperature resistance: 120 ºC
Medium Arrestance : 97.90 %
Specification:
Filtering Grade : F5/EU-5 DIN 24185
Weight (g/m2) | Air velocity (m/sec) | Air flow rate (m3/h) | Resistance (Pa) | Dust Holding Capacity (g/m2) | Flame resistance | Sizes |
600 | 0.25 | 900 | 26-400 | 435 | F-1 DIN 53438 | 1.6M*14 M*20MM |
1.6M*20 M*20MM |
Note: Other specifications are available on request
Folded dry-type paper filter
Usage:
New environmental protection product. It makes the spray-paint rid of water, no pollution. base on the inertial separation principle.Application:
filter the particulars of the solid and liquid in the air,adn reach the uniform flow effect
Filter material and features:
1.the design is good for the distribution of the speed
2.Low resistance and high efficiency
3.long-span than other paper filter,up to six times
4.can be used for 500-600 hours continuously,confirm to DIN54438 K1
5.It will be better if add fiberglass or synthetic cotton on inlet side.
6.can make filter with frame upon request
Specification :
Model | Width (cm) | Length (one box) | Price(USD) FOB Qingdao | Min order (m2) |
Standard paper filter | 100cm | 100cm | USD 3.8/M2 | 500M2 |
Paper filter with cotton | 100cm | 100cm | USD 4.3/M2 | 500M2 |
Purification System | Pre-filter Cotton | Pre-filter: installed on the air inlet to prevent large dust particles larger than 10µm and other impurities; Recommended time for changing: 60-80 working hours | |
Ceiling Filter Cotton | Ceiling filter: installed on the ceiling frame to prevent much smaller dust, make sure the air is clean. Recommended time for changing: 400-450 working hours | ||
Floor Filter Cotton | Fiberglass floor filter: installed under grilles for full downdraft spray booth; installed on exhaust cabinet for semi downdraft spray booth. It is used to prevent paint mist going outside. Recommended time for changing: 40-60 working hours | ||
Activated carbon filter | At the exhaust outlet of the exhaust box. To absorb paint smell Recommended time for changing: 80-100 working hours |