FEP film is made from fluorinated ethylene propylene (FEP) resin. FEP provides the chemical and thermal resistance to withstand aggressive environments, making it an excellent candidate for diaphragms, gaskets, protective linings, sample bags, and containers. Fabricated shapes and contours can be produced via heat sealing and thermoforming.The outstanding weatherability and optical properties of FEP film provide excellent performance in environmental growth chambers and solar collectors. 

Thickness:0.025 to 0.5mm or As Customized
Width: 50~300mm or Customized
Length: Customized

Main features of FEP film:

1. Extremely good adhesion with F4(PTFE), good heatsealing.
    Under melting point, it didn't have chemical reaction with other material. 
    Beyond melting point, it has good adhesion with F4 and metal

2. Wide operating temperature-85 °C to 200 °C;

3. Aging resistance, long life(more than 20 years);

4. Excellent resistance to solvents and chemicals;

5. Good flame resistance;

6. Extremely smooth surface;

7. Non-stick, non-toxic, water proof and oil proof,Water wrapping angle: θ=114ºC;

8. High transparency:
    UV light and visiable light have good penetrating, compared with other plastic, it has the lowest refraction coefficient.

9. Electricity reliability, high insulation Under 60HZ60MHZ, dielectric constant is 2.1. Even if firing, and it will still insulate. Volume resistance > 10^18Ωm Surface resistance > 2 X 10^13Ω Voltaic  Arc >165 seconds insulation.

Use:
*  Agglutinant
*  Make iron floor
*  F4 wax cloth belt, transmission belt combining adhibiting
*  F4 copper board inner adhibiting
*  Window
*  Electroanalysis
*  High temperature adhesive tape material
*  Make Capacitor
*  Biological cryogenic protecting material
*  Non-metal compensator in thermo-eletric plant 
*  Explosion-proof electric machine
*  Surface protecting material
*  3d printers






Factory environment


About us

Zeyou Fluoroplastic Material Technology Co., Ltd is located in Kunshan city, very close to Shanghai. We specialize in D&R and manufacturing fluoropolymer products: release film,welding film,coiled tube,convoluted tubing,insulated flexible tubing,eptfe filtration membrane,welding rod,sheet/rod,tubing fitting,etc.. made from 100% virgin FEP/PFA/PTFE/EPTFE/PVDF/ETFE.

We are very expert in fluoroplastics field and committed to developing and supplying the cost efficient, high quality fluoropolymer products. And for regular specifications, we have lots of stocks, for odd specs, it could be customized, since we have advanced production and test equipments, expert technical engineers and skilled workers.

Main Products:

1) FEP,F46 transparent tube, insulation tube, heat shrink tube,coil pipe,liner tube, bellows, painting tube, sheet, rod, film, welding rod;

2) PFA transparent tube, insulation tube, heat shrink tube, coil pipe, liner tube, bellows, painting  tube, sheet, rod, film, welding rod, connector , tee,elbow,winding pipe ;

3) Microporous PTFE membrane:air filtration membrane and water filtration membrane;

4) PTFE,F4 tube, liner tube, high pressure stainless steel braid hose, bellows, painting tube, sheet, rod, film, winding pipe ;

5) PVDF, F26 tube, connector, tee;
     
For all the fluorine plastic products, we can accpet customized in special size.

Characteristic:

Excellent resistance to high and low temperature, it can be used in -80~+260ºC for a long time, resistance to climatic againg, fireproof, high oxygen index, non-absorbency, excellent resistance to radiation, such as long-term exposure in the atmosphere, the surface and various performance remind unchanged: Excellent dielectric perfomance, high voltage resistance: Excellent corrosion resistance , almost insoluble 

Welcome to visit or contact us to have a communication and discussion of fluoropolymer products, and we will offer the best solution for you.