Pharmaceutical grade PES pleated filter/0.2 micron water filter

Pharmaceutical grade PES  pleated Filter/0.2 micron water filterProduct Description: Industrial PP/PTFE/PES/NYLON pleated membrane cartridge filter for SS water filter housing (10-50 inch)Microporous pleated filter element, the main filter material is : Stainless steel wire mesh, sintered wire mesh,Polypropylene, Hydrophobi

Featured Products

Pharmaceutical grade PES  pleated Filter/0.2 micron water filter
Product Description:


Industrial PP/PTFE/PES/NYLON pleated membrane cartridge filter for SS water filter housing (10-50 inch)
Microporous pleated filter element, the main filter material is : Stainless steel wire mesh, sintered wire mesh,Polypropylene, Hydrophobic PTFE, Hydrophilic PTFE,Polyether sulfone, Nylon, etc.
Most of the raw materials are imported from abroad.Pleated filter element is a kind of deep filtration filter,
it is usuaslly used as liquid overheating,clarification, filtration and terminal filter.It has the following characteristics: the superfine polypropylene fiber membrane as the filtration medium, low pressure differential, high flux, good filtration precision, lower economic cost. The whole structure of polypropylene, end cover, housing and center pole adopts polypropylene material; It adopts the hot melt welding process, PP and PP melt bonding,without any binder. It has wide range of chemical compatibility, and also has a series of pore size and form a variety of interface.Material: Pleated filter, Support layer, End-cover, Inside & Outside cylinder are polypropylene.
Welding: It adopts the uniquehot melting methods, no glue, no foreign body fall off.
Typical use: Pharmaceutical, Food, Chemical, Electronics, Environmental protection, etc.
Microporous membrane pleated filter cartridge main features: High interception rate, high liquidity, low pressure differential and a wide range of chemical compatibility; 
The production process adopts unique hot melting process technology, no any adhesive, 
no foreign body release. 
It can meet the food,beverage, beer, chemical, pharmaceutical and other industries production 
requirements. 


Specifications
aterial of ConstructionFilter MediaHydrophilic Polyethersulfone
Support LayersPolypropylene
Micron Rating0.1,0.2,0.45μm
Inner CoreReinforced Polypropylene
Outer cage, End CapReinforced Polypropylene
Seal MethodThermal Bonded, No Adhesives
O-ring/GasketsEPDM, Silicone, Buna, Viton
Cartridge DimensionsOuter Diameter69mm (2.75")
Inner Diameter28mm (1.10")
Length(Based on DOE END Cap)5", 10", 20", 30", 40"
Filtration Area (m2)0.65m2 per 10"
Operating ConditionsNormal Operating Temp.Up to 65ºC (140ºF )
Max. Operating Temp.85ºC(185ºF) at P<1.0 bar (14.5 psi)
Forward Flow Direction4.8 bar (70psi) at 25ºC (77ºF)
Reverse Flow Direction2.7 bar (40psi) at 25ºC (77ºF)
PH Value Compatibility2-13
Sterilization Temp. TimeSteam Sterilization for 30minutes at 121+_2ºC, 100 cycles, Cumulative time: 8
Cartridage SafetyEndotoxin<0.25 EU/ml
Extractables0.03g/10"

Application:

 1. Micro-filtration in ultrapure water system

 2. Beverage, wine, draft beer and other drinks

 3. Plating solutions

 4. Pharmaceutics

 5. Chemical industry
 
6. Photoelectric industry

Pharmaceutical grade PES pleated Filter/0.2 micron water filter


Polypropylene microporous membrane filter
Using the polypropylene composite membrane filter as the filtration material, 
this filter is a kind of advanced and fixed type deep filtration filter cartridges, 
the filtration micron is from 0.1um to 60um. The filtration membrane is not affected 
by feed water pressure. Its unique advantages for low pressure differential, high flux, 
good filtration precision, and low economic cost, it is favored by the users.
 
Hydrophobic PTFE filter
The filter medium is Hydrophobic PTFE microporous membrane filter: Strong hydrophobicity, 
High holding rate, excellent chemical resistance and thermal stability, good strength, 
impact resistance of the forward & reverse pressure. 
 
Hydrophilic PTFE filter
The filter element medium for hydrphilic PTFE microporous membrane filter: The hydrophilic 
stability, high entrapment rate, excellent chemical resistance thermal stability, good strength, 
impact resistance of the forward & reverse pressure. 
 
Polyether Sulphone Filter
The filter element is advanced in the world, the PES membrane micro opening rate is more than 
80%, it has the unique microporous geometry type, it improves the filter cartridge filtration 
efficiency and liquidity of the difficult solution. It is composed by PES membrane and the 
polypropylene support material hot melting, it is no dung, also applicable for the strict chemical 
and pharmaceutical industries. 
The main features: Unique hydrophilic,not included the activated surfactant and surface 
lubricant, it is provided high level filtration precision and flow rate for the filtration liquid. 
It is applicable for wide PH range, low adsorption for the protein and the valuave heavy metal 
biological, high entrapment rate, excellent chemical resistance and thermal stability, 
good strength,  impact resistance of the forward & reverse pressure.
 
Nylon filter
The filter medium is hydrophilic nylon microporous membrane filter, It is composed by nylon 
membrane and the polypropylene support material hot melting, it is no dung, also applicable 
for the strict chemical and pharmaceutical industries. 
Main features:Hydrophilic stability, strong flexibility, high entrapment rate, excellent chemical 
resistance, especially suitable for filtering of the organic solvent. Forward and reverse pressure 
shock resistance.


Connection type
Pharmaceutical grade PES pleated Filter/0.2 micron water filter


If you are intereated in our PP pleated filter cartridge or have any questions, please feel free to contact me.
  ITEM  PRECISION  ADAPTOR  O-RINGLENGTH   METERIAL
   0.2UM  222  SILICON  10"  PP
   0.45UM  226  EPDM  20"  PTFE
   1UM  DOUBLE  VITON  30"  PESU
   5UM  OPEN END   40" 
   10UM    
   20UM   

Company 
Pharmaceutical grade PES pleated Filter/0.2 micron water filter
Pharmaceutical grade PES pleated Filter/0.2 micron water filter
Pharmaceutical grade PES pleated Filter/0.2 micron water filter
Pharmaceutical grade PES pleated Filter/0.2 micron water filter





 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours